7.
Attach the Radiator
Valve to your radiator by
screwing to the top of the
valve and tighten the nut
until it is secure.
8.
Press down on the LCD
screen once and F2 will
appear on the screen.
9.
After about 10 seconds,
the wrench symbol
will disappear and the
current temperature will
be displayed.
When the thermostat is
installed, the Radiator
Valve will be adjusted
automatically according
to your heating system.
During this process,
you may find that the
Radiator Valve is slow at
responding or self heating
/ self cooling. This is
normal and is a necessary
part of the installation
process.
The Radiator Valve will
close the valve at a
specific time, and then
open it again to detect
the exact opening
position of the valve.
The automatic detection
function will make the
radiator valve as efficient
as possible and will
control the temperature
more accurately.
If necessary, please
reload the batteries,
activate the installation
mode and manually run
the automatic detection
function.
