No too ls are required to set up the LCD monito r. Simp ly
follow the instructions outlined in the next few pages.
Connectors for the signal cables and po wer are located on
the back of the panel b ehind the cover door. Please refer to
the d iagram on this page for the connector configuration.
Connect Signal Cable (V GA
)
Attach the VGA signal cable end, which has the ferrite core
furthest away from the plug, to the monitor and attach the
other end to the graphics card ad apter on your computer.
Be cautious in inserting the cab le p rop erly into b oth
connectors. If the cable does not seem to fit it may be facing
the wrong direction. Turn the cable over and try to match
the shape of the co nnector with that of the graphics ad apter.
Connect Power Adapter and Cable
Connect the round shape p lug end of the AC/DC adapter to
the DC Power input connector of the LCD monitor. Co nnect
the female end of the po wer cab le to the AC po wer inp ut
receptacle on the AC/DC adapter. Then, plug the male end
of the power cable into an AC o utlet.
S
E
T
U
P
2
Connect DVI Cable
Connect the DVI cable to the DVI connector of the monitor.
If the cable does not seem to fit, it may be facing the wrong
direction. Please turn the cable over and try it.ling.
CAUTION: When yo u d isco nnect the cord/cables, be
sure to hold the connector and no t the cable itself.
6
Summary of Contents for V7 Super Slim Line L23.1A
Page 1: ......
