Peel the tape and film off the Sound Bar as illustrated, then match the Sound Bar
with
the stand plate and fix it with 4 M4X6mm screws.
Put back the magnetic glass cover of the Subwoofer, and stick
the footpads on the two ends of the bottom stand bracket.
Plug in the Subwoofer power cable, and let the TV power cable and
the Sound Bar connection cable go through the groove as illustrated.
Fix the linking plate on the two ends of the one side of the stand plate
with 5 M3X6mm screws as illustrated in Figure 1. Then secure the
stand plate to the Subwoofer with 12 M5X15mm screws as illustrated
in Figure 2.
Remove the magnetic glass cover of the Subwoofer, align the Subwoofer
with the screw holes in the connectors and secure the Subwoofer to the
connectors with 8 M5X15mm screws as illustrated.
Lift the TV set upright. All installation is now completed.
Installation of the table stand is done.
9
10
11
12
13
14
15
16
17
18
Put the left and right stand brackets on the back of the TV and secure
them to the TV with 8 M5X15mm screws.
Secure the two ends of the bottom stand bracket to the left and right stand brackets
with 6 M4X10mm screws. Secure the middle part of the bottom stand bracket to
the stand plate with 5 M3X6mm screws. Refer to the illustration below.
1
1
2
2
M4X10mm
M4X10mm
M3X6mm
Put back the four magnetic glass covers as illustrated.
Sound Bar connection cable
TV power cable
Sound Bar connection cable
TV power cable
Note:
Before securing the Subwoofer,
get the two cables out through
the Subwoofer.
Sound Bar connection cable
TV power cable
Subwoofer power cable
Sound Bar connection cable
TV power cable
Subwoofer power cable
