4.
2.
3.
Powering up the Voice Pro.
a.) Place the Voice Pro on the desk or (using the wall
mount template) mount Voice Pro on the wall.
b.) Plug power supply into AC outlet. Connect the male con-
nector to the power jack on the rear of the Voice Pro system.
c.) After connecting the power supply, the red power light
should be illuminated, and the green light should flash.
Connecting 1-line telephones to the Voice Pro.
The Voice Pro system supports up to 6 telephone extensions.
Single (one) line telephones plug directly into the desired
jack on the Voice Pro.
As many as 6 devices may be connected – corded or cordless
phones, fax machines or even credit card machines.
Connecting 2-line telephones to Voice Pro.
If you are connecting a 2-line telephone to the Voice Pro,
proceed as follows:
a.) If your 2-line telephone has 1 jack on the back of
the telephone:
- Connect a line cord to the rear of the telephone.
- Connect the other end of the line cord to the splitter.
Use the two 6-inch line cords to connect to the splitter then
to the desired extensions of the Voice Pro.
Sold by:
http://www.TWAcomm.com
Toll Free: (877) 892-2666
