background image

 Air Conditioner Service Manual

 

 

8

 

 

 
 
 

 Running into defrosting under  condition 3, defrosting time set is 10 min. 
a)  Running into the first defrosting in 20 min after start-up. 
b)  The interval from last defrosting equivalent to or more than 50 min (stopping the compressor or the 
machine in standby is allowed in the meantime). 

Option 2: Without Jumper JC, and no OPT outdoor sensor 

when the compressor runs for 45 min (accumulated), if the indoor coil temperature is less than 40°C for 
2 min, the  machine runs into defrosting, and lasts for 3min, otherwise when the compressor 
runs for 120 min (accumulated), the machine runs into defrosting automatically and last for 10 min. 

Option 3: Without jumper JC, but with OPT outdoor sensor 

While heating, when the temperature of condenser is lower than E °C (-4°C),  and the compressor runs 
for 45 min (accumulated), then the machine runs into defrosting and lasts for 10 min. 

Option 4.

 On heating, while the outdoor fan motor stopped but the compressor operated 

accumulative totally 30min, then the machine runs into defrosting and last for 8 min. if the accumulative 
totally less than 30min, but accord with one of the condition option 1-3 then the machine runs into 
defrosting at the option 1-3 and the accumulative total time restarts from 0. 
Conditions for quitting defrosting 
(1)  The quitting conditions for option 1, option 2 and 4, the machine quits from defrosting if any one 
below condition met. 

a. Defrosting time is over. 

b. When it runs in defrosting for three minutes, the IPT indoor coil temperature rises 15°C or above 

from the bottom point. 
(2)  The quitting conditions for option 3. 
When OPT 

 20°C or defrosting for more than 10 min, then quit from defrosting. 

(3)  Defrosting process shown in Figure 4 
 
 
 
 
 
 
 
 
 
 
 
 
 

Figure 4 Defrosting process 

 
7)  Auxiliary electric heating function (optional) 
(1)  The default condition is automatic on/off the electric heating function. 
(2)  The conditions of auxiliary electric heating works (all the following conditions must be met) 
a.  the compressor runs for more than 3min

 

b.  indoor fan runs normally

 

c.  not in defrosting state; 

Compressor Relay

ON

OFF

ON

ON

OFF

OFF

ON

ON

ON

OFF

39S

19S

5S

t

4-way Valve

Outdoor Fan

The indoor fan runs in anti-cold wind modle

Defrosting time MAX 12 Min

ON

Summary of Contents for TFC-24HRA



































Reviews: