background image

5

Note: Each mode and relevant function will be further specified in following pages. 

Remote controller

1

2

4

3

5

6

9

7

MODE  button

ECO button

FAN SPEED button 

TEMP UP button

TIMER  button

SLEEP button

 TEMP DOWN button

To select the  mode of operation

.

 

In cooling mode,press this button ,the temperature 
will increase 2

 on the base of setting temperature:

In heating mode, press  this button, the temperature 
will decrease 2

 on the base of setting temperature. 

To switch the conditioner on and off.

To select the  fan speed of auto/low/mid/high. 

To set  automatic switching-on/off

.

 

Increase the temperature or time by 1 unit.

  

To activate the function  SLEEP

.

 Decrease the temperature or time by 1 unit.

 Air Conditioner Service Manual

5.

Operation Details

Remote Control

The remote controller is not  presetting as Cooling Only Air Conditioner or Heat Pump by manufacturer.
Each time after the remote controller replace batteries or is energized, the arrowhead will flashes on the front of 
Heat

or 

Cool

on LCD of the remote controller.

User can preset the remote controller type depending on the air conditioner type you have purchased as follows:
Press any button when the arrowhead flashes on the front of 

Cool 

, Cooling Only is set.

Press any button when the arrowhead flashes on the front of 

 Heat

, Heat Pump is set.

If you don

t press any button within 10 seconds, the remote controller is preset as Heat Pump automatically.

LOCK/UNLOCK

Note :

If the air conditioner you purchased is a Cooling Only one, but you preset the remote controller as Heat Pump, it 
doesn

t bring any matter. But if the air conditioner you purchased is a Heat Pump one, and you preset the remote 

controller  as Cooling Only, then you CAN NOT preset the Heating operation with the remote controller.

When you press the buttons "MODE" and "TIMER" at the same time, the remote controller will be locked, all buttons 
of the remote controller will be deactive and it displays "Lo" .You can operate again as the same way to unlock the 
remote controller.

8

DISPLAY  button

In cooling mode, press this button, the unit will give 
the maximum cooling temperature with 16

 

In heating mode, press this button, the unit will give 
the maximum heating temperature with 31

.

 

9

SWING  button

10

To activate or deactivate of the movement of the 

DEFLECTORS

.

 

12

HEALTH  button

9

3

4

2

1

8

5
6

7

5

9

10

11

9

 ON/OFF button

11

To  

 LED display (if present)

switch  on/off the

12

TURBO  button

MODE

FAN

SLEEP

ECO

TIMER

SWING

TURBO

MUTE

DISPLAY

SWING

HEALTH

I FEEL

13

14

13

14

I FEEL  button

To switch - activr/deactive

I FEEL

function. The

 air 

conditioner will regulate the room temperature base on the
temperature(0

~50

) around the remote controller.This 

function will terminate 2 hours later once it's active.

To switch - on /off 

HEALTHY funtion. 

 

It is a button 

which controls the ionizer or plasma generator only
for inverter type.

MUTE  button

To activate the function of Mute.  

Summary of Contents for TAC-07CHSA/XA71










































Reviews: