TCL Sweeva 6500 User Manual Download Page 6

EN

04

Safety Instructions

Scope of use

Safety precautions

Read the user manual carefully and use the product in accordance with the instructions in the manual to avoid damage due to 

improper operation.

This product can only be used indoors for the cleaning of wooden floors, ceramic tiles and short-staple carpets. and can not be 

used on glass surfaces, water or reflective surfaces.

Do not use the product in high - temperature, humid, flammable, explosive or corrosive environments.

To prevent the product from falling accidentally, do not use this product in a suspended place without a protective fence, which 

may result in personal injury.

WARNING—This product contains a UV-C emitter that can not be replaced, do not stare at the lamp.

To turn on/off the UVC function, open the TCL Home app and toggle the on/off switch on the product’s control page. 

Never expose skin or eyes directly to UVC LED for risk of injury. Should you believe the UVC is not functioning properly or is exposed 

from any side other than the underside of the vacuum, please contact support immediately using the “Support” tab inside the 

app. UVC will turn off automatically if the robot detects it has been removed from the floor/flat down/normal operating position.

Improper use of the machine or damage to the housing may cause UV-C leakage. Even small doses of UV-C radiation can cause 

damage to the eyes and skin.

Before removing the safety protection accessories of t he UV-C lamp, please make sure that the power of the product 

is disconnected.

This product can only adopt the adapter, battery and charging dock provided. Failure to do so may result in damage to the 

product. The user shall not replace the battery without authorization.

If the main machine and accessories of this product are found to be damaged, please contact our service technicians for 

repair. Except for the service technicians designated or authorized by our company, no one may disassemble, repair 

or modify this product.

Prevent the suction of water, oil or other liquids, which may damage the sweeper.

Do not use this product to suck in sharp objects (e.g. shattered glass and nails) for fear of damage to the product.

Summary of Contents for Sweeva 6500

































Reviews: