EN
Clean the dust box
Clean the dust box
Daily Maintenance
22
Empty the dust box, put the dust box close to the trash can,
and tap the dust box gently to knock off the excess dirt.
Disassemble the removed filter assembly, take out the
high-performance filter, and clean the filter with the
supplied cleaning brush.
The dust box and filter assembly can be thoroughly rinsed
with water as needed. (Note: The filter cannot be cleaned
with hot water or detergent.)
After cleaning, the dust box and filter assembly must be
thoroughly air-dried. (Note: Repeated washing will destroy
the material of the high-performance filter and make it
ineffective. Please clean it with caution.)
Reassemble the air-dried dust box and filter assembly, and
put it back into the robot vacuum.
If the wet dust box and filter assembly are put back into the
robot vacuum, it may cause damage to the main machine
or fan.
*
①
②
③
④
⑤
As shown in the figure below, press the buckle to take out
the protective cover, and take out the rolling brush
upwards.
Clean the rolling brush with a cleaning tool, and the blade
can cut off the hair entangled on the rolling brush.
Remove the spool at one end of the rolling brush and
clean away the hair entangled on it.
After cleaning, put the rolling brush back and make sure it
is installed in place.
①
②
③
④
Clean the rolling brush
Summary of Contents for Sweeva 6500
Page 1: ...6000 6500...
Page 2: ......