27
Scanning for channels can take several minutes.
Note
: You should plan to repeat the channel scan periodically to make sure you are receiving all
of the latest channels. Broadcasters add and remove channels, move channels to different parts
of the spectrum, and change the power levels of their channels periodically. You’ll also have to
repeat the channel scan if you remove the
Antenna TV
tile from the
Home
screen or perform a
factory reset. To repeat the channel scan at any time, go to
Settings > TV Inputs > Antenna TV >
Scan again for channels
. Your antenna reception and picture quality depend on the position of
your antenna and on your location relative to the antennas of broadcasters in your area.
Now, you’re ready to watch broadcast TV! While you’re watching, try the following:
Press
UP
or
DOWN
to change channels.
Press
LEFT
to display the channel list and then use UP and DOWN to select a channel to watch.
Or press
REWIND
or
FAST FORWARD
to jump through the channel list a page at a time.
Press
OK
to display information about the current program.
Press to switch to the previously tuned channel.
Press
to see options for picture and sound settings.
has more information on using the remote control buttons
while watching TV.
