TCL RF436GM1110, Operating Instructions Manual

Page: 7 / 177

6
Handling and placement
During handling, the door
side of the refrigerator shall
not contact with the handling
tools
Removing the foam base is
beneficial for bottom heat
dissipation and can avoid fire.
The refrigerator shall be
placed in an environment
which is dry, has good
ventilation, far from direct
sunshine and heat source.
The refrigerator shall be
placed on the flat and firm
surface. If the ground is not
flat, adjust the adjusting leg to
keep it level. Never place the refrigerator
into a too cold environment
that may get frozen.
Warm prompt:
--When handling the refrigerator, at least two persons are required - one lifts the
top of rear part, the other one handles the bottom (if one part is clamped, it is quite
dangerous and may cause accident).
--When moving the refrigerator, the lower runner may damage and scratch the
floor. If you need to move the refrigerator for a long distance, the internal
accessories shall be fixed using adhesive tape. Otherwise, the accessories may
get damaged due to crashing each other.
--Please place the refrigerator in the position with small vibration or little exposed
to vibration. For users in the area where earthquake often occurs, please fix the
refrigerator against the wall or pole. Otherwise, the falling of refrigerator will cause
accident.
--Su
ffi cient clearance shall be left around. If the clearance is too small or place
goods on the top or close to the side, or paste on the sides, the heat dissipation of
refrigerator will be affected, and thus to cause unnecessary electric energy waste
as well as burn out of the wall and other goods; the contact between the back and
wall will cause vibration and noise;
--Adjust the front part and adjusting leg of the refrigerator to level it. Unlevel of the
refrigerator will cause vibration and noise.
Certain space shall be left
around the refrigerator,
shown in the figure.
>30cm
>10cm >10cm
EN