11
Make sure you click
Apply
after making the desired changes.
Wi-Fi
Basic
Configure basic Wi-Fi settings in this option.
SSID
SSID is the name of the Wi-Fi network.
SSID Broadcast
This function is enabled by default.
When this function is disabled, other users cannot detect the SSID or
the Wi-Fi name. They need to manually enter the SSID to connect to
your CPE network.
Security
The available security modes include
Disable
,
WPA2
,
WPA/WPA2
,
WPA2/WPA3
,
WPA3
.
Encryption
The
AES
encryption is set by default.
Password
Check the Wi-Fi password in this item.
Advanced
Configure advanced Wi-Fi settings in this option.
Max. connected
devices
The maximum number of client devices that can connect to your
CPE network at a time is set to 16.
Wi-Fi mode
The mode is set to 802.11ax by default.
AP isolation
The AP isolation function enables you to create a separate virtual
network for each wireless client that is connected to your CPE
network. When this function is enabled, all wireless devices in the
network will not be able to communicate with each other.
Channel bandwidth
Select the available options from the drop-down menu.
Channel
Different regions use different channels: Channel 1-11 in FCC (US)/
IC (Canada), Channel 1-13 in ETSI (Europe), and Channel 1-13 in
MKK (Japan). When the channel option is set to
Auto
, the CPE will
select the best channel automatically.
Guest network
In this tab, you can enable or disable the
Guest network
feature, and configure the guest
network Wi-Fi name, Wi-Fi password, and validity duration. Devices connected to the guest
network can access the Internet, but cannot access the CPE web UI or the master network.
WPS
Wi-Fi Protected Setup (WPS) is a wireless network security standard that tries to make
connections between your CPE and wireless devices faster and easier.
If your wireless device is WPS-supported, you can access the CPE Wi-Fi network through a
WPS connection. Select one of the following options to make a WPS connection.