TCL LCD32M61S3-MS19, Service Manual

Page: 31 / 72

TCL Multimedia R&D Center File number: 3
SAT. Saturation curve OK
SHARP Sharpness curve OK
Light Back light curve OK
Picture
mode
This function set four picture modes in factory
menu(soft,natural,bright, personal) their simulate volume
can adjust, but it is adjust well while designing. It can be
fine adjust in special case.
Producting Items must be adjusted in factory producing OK
Factory
hot key
Shortcut key for enter factory mode. If it is set as ON, can
enter factory menu through press ‘GO BACK’ on remote
control. Must set as OFF before TV go out of plant.
OK
Warm
status
Aging mode. If this item set as ON, while there is no signal
input, TV should be snow dots, not blue screen. When TV
need aging, please set as ON, the default is OFF, please set
as OFF before go out of plant.
OK
EEPROM
init
Initial EEPROM. The first start up must initial EEPROM
after the TV is finish assembly. Press LEFT or RIGHT key
and wait for about 7 seconds, will display OK on screen, it
says that finished the initial. Please turn off the TV then
restart up and adjust the other items.
Structure Frame(mode) choose. This chassis compatible with several
modes. Switch this item can choose mode, nowadays there
are E62(L32E62S3) and M61-M71(L32M61S3/L32M71S3)
can be chose, while producing, must confirm the mode first,
then switch it right. It goes into effect after turn off the TV.
OK
Shop
content
Some out factory set, please obey the default value, without
customer special necessary.
OK
Volume Default value 30 OK
Picture
mode
Default natural OK
Sound
mode
Default STEREO OK
TV
channel
Default channel is 1 OK
Language Default English OK
Color
Tone
Option item, normal, warm, cool OK
SET UP The process of start up setting, default is LAST OK
Power
mode
Last, makes the TV memory last turn off TV’s situation. For
example, if plug off the AC power cord to turn off the TV, it
will be turn on while plug in the power cord; if standby the
TV last time, it should be turn on be manual.
OK
Power
mode STB
STB(standby), TV insist as standby situation while power
on, need manual turn it on.
OK