TCL L43P8US, Operation Manual

Page: 11 / 46

9
Getting Started
TV Button
If the batteries in your remote control are run down, you can use the button(s) on your TV set.
For models only with one / button on the TV set, it may work just as Power on/Standby button, or as a
multi-function controller.
You can turn on the TV by pressing button at the bottom of the TV.
While the TV is on, the multi-function menu appears by pressing button at the bottom of the TV. More
information about how to use the multi-function menu, please refer to the figure below.
• Press to move the highlight to the next function selection
•
Press and hold the button for more than 2 seconds to confirm your selection.
Note:
You can follow the on-screen guide to operate.
Figures and illustrations are provided for reference only and may vary depending on the model.
Initial Setup
The first time you switch the set on, the Welcome wizard appears, which guides you through the initial setup
process. Follow the on-screen instructions to finish the initial setup process such as selecting the language,
connecting to the network, and more. During each step, either make a choice or skip the step. If you skip a step,
you can perform the setup later from the settings menu.