第
12
页共
11
页
¾
When the "UPGRADING SOFTWARE" picture appears as below, it means TV is
uploading SW BIN image. Waiting a few minutes.
¾
When updating is successful, TV should restart automatically.
Appendix
p
“How to upgrade FLASH SW using USB”
There are two methods to upgrade SW using USB, the first one like below
：
¾
In the previous of upgrade SW using USB, should program mboot bin file
”
V8-xMS08BP-LB1Vxxx.bin”
by ISP_Tool or by USB. .
¾
Then switch off TV by removing AC cord.
¾
Copy the SW BIN image
“MS08BPupgrade.bin”
for
MS08BP/MS08BPA
into
USB stick (pen drive) root path
Note: If there’s already other
“
The same name
”
into USB root, it needs to be deleted or renamed
¾
Plug USB stick to the TV
¾
Press and hold the power key of key board before reconnect AC cord to restart
TV for 5-8seconds.
¾
Once USB stick starts blinking, TV is uploading SW BIN image.
¾
When update is successful, TV should restart automatically.
¾
Remember to perform “
Factory menu
Æ
NVM reset
“ and then press RCU “
OK
”
key
¾
Switch off TV by removing AC cord
¾
Reconnect AC cord to restart TV and wait few seconds for Eeprom update
The second method
：
¾
To use this method, there should be SW in mainboard to ensure TV can display
normally.
¾
Copy the SW BIN image
“V8-XMS08BP-LF1VXXX.bin”
into USB stick (pen
drive) root path
¾
Press
RCU
MENU
Æ
Setting
Æ
Function
Æ
software upgrade
Æ
OK
Æ
By USB
¾
TV display warning information, that means it is upgrading, almost 3minutes later,
when upgrade successful, TV should restart automatically.
