TCL HH512V User Manual Download Page 16

Dynamic Host Configuration Protocol (DHCP) is a client or server protocol that automatically provides you with 

an Internet Protocol (IP) host. IP addresses and related configuration settings (such as subnet masks and default 

gateways) are automatically assigned.

DHCP

Point-to-Point Protocol over Ethernet (PPPoE) is a network communication protocol mainly used for 

DSL services. Individual users can connect to the modem via Ethernet.

PPPoE

Please enter the username and password provided by your Internet service provider and click Apply.

Access the Internet using a fixed IP address, subnet mask, gateway IP address, and primary DNS server. 

This information should be provided by your Internet service provider.

Static IP

WAN (MAC Clone)

when

MAC copy function

When enabled, multiple client devices can connect to the CPE and access the Internet.

Your current MAC address will appear in this option. click it once

reset

to set a new MAC address. click it once

Copy

to copy 

your host's MAC address.

LAN

The default gateway address is 192.168.1.1 and the default subnet mask is 255.255.255.0.

enable

DHCP server

After the function is enabled, IP addresses will be automatically assigned to client devices on the network. like

DHCP server

The 

feature is disabled and the CPE will not assign IP addresses to connected client devices. The IP address must be entered on each client device.

bandwidth control

This feature allows you to view online device information and set upload or download restrictions for the device if necessary.

IP filter

By default, any device connected to your CPE network is allowed to access the Internet. Specify which devices are not allowed to 

access the Internet by adding them to the blacklist.

MAC filter

By default, any device connected to your CPE network is allowed to access the Internet. You can specify which devices can 

or cannot access the Internet by adding them to a blacklist or whitelist.

deactivate

whitelist

All connected devices can access the Internet.

Only devices with MAC addresses in this list can access the Internet.

blacklist

Devices with MAC addresses in this list cannot access the Internet.

13

Summary of Contents for HH512V























Reviews: