12
Getting started with your device
3) When prompted for a password, enter the Wi-Fi password found on the device label (this
is case sensitive). Your client will notify you when it is connected.
y
Set up a Wi-Fi connection through WPS. For details, see “3.4.2 Connect in WPS mode”.
3.4.2
Connect.in.WPS.mode
Your client must support WPS. There are 3 ways to set up a WPS connection.
Option.1:.
WPS button
1) Press and hold the WPS button for 3 seconds. The Wi-Fi indicator will begin to flash blue.
2) Enable WPS on your personal device within 2 minutes.
3) Your personal device should then be connected to your device wirelessly.
Option.2:.
via
Start.WPS
button in Web UI
1) Open the WPS page on your Web UI.
2)
Go to
Settings.
>
Wi-Fi
>
WPS.
3) Click on
Start.WPS
.
4) Enable WPS on your personal device within 2 minutes.
5) Your personal device should then be connected to your device wirelessly.
Option.3:
WPS PIN code
1) Open the WPS page on your Web UI.
2)
Go to
.Settings
>
Wi-Fi
>
WPS
.
3) Switch on
Router's PIN
.
4) Enter the PIN code on your personal device.
Summary of Contents for HH130VM
Page 1: ...USER GUIDE HH130VM ...
