5
3
Connect your
headphones
Before you can make calls and enjoy music with your
headphones, follow the instructions below to set up and
connect your headphones.
Charge your headphones
Connect the supplied USB charging cable to:
•
The micro USB charging slot on the headphones and;
•
The charger/USB port of a computer.
LED turns white during charging and turns off when the
headphones are fully charged.
Note
•
For first time use, charge the battery for 5 hours for
optimum battery capacity and lifetime.
•
After the first time charge, a normal charge takes
approximately 2 hours.
•
Use only the supplied USB charging cable to charge your
headphones to prevent product damage.
Warning
Only charge with certified USB adaptor DC 5V
Pair the headphones with your
smartphone or Bluetooth
®
devices
For the first time use, you have to pair the headphones with
your smartphone manually.
1 Make sure that the headphones are fully charged.
2 Press and hold
for 5 seconds until the blue and white
LED flashes alternately.
3 Turn on the Bluetooth
®
function of your smartphone.
4 Select
TCL ELIT400BT
. Enter ‘
0000
’ if the headphones
password is required.
The blue LED will flash when pairing is successful.
TCL ELIT400BT
00:05
Note
•
The headphones can save up to 8 different devices you
have connected. If you connect to more than 8 devices,
the earliest connected device is replaced by the last
connected one.
•
Make sure your smartphone or device has Bluetooth
®
capability and is compatible to the headphones (see
'Bluetooth
®
profile' on page 3).
