15
to display
Quick Settings
panel, use
Left/Right
to
select
Live TV Pause
, and press
OK
to enter.
1.
Follow the directions on the screen to do the disk
setup if you use Live TV Pause for the first time.
2.
After the disk setup is done, Live TV Pause will
start, and the Live TV Pause menu displays on the
screen.
3.
When the Live TV Pause menu disappears and
only the timing of the Live TV Pause remains on
the screen, you can press
OK
to call out the Live
TV Pause menu and operate according to the on-
screen prompt.
4.
Press button to stop the Live TV Pause and exit.
Notes:
- This feature is available only for digital channels.
- Before you plug the USB drive to TV, make sure
you have backed up the data on the drive to avoid
unforeseen malfunction and data loss.
- We recommend that you use a USB drive with at
least 1GB free space and a disk speed faster than
5.0MB/sec.
- The bigger the USB drive free space for Live TV
Pause
, the bigger the recording length.
PVR
(Personal Video Recorder)
(* Available according to the software version)
Allows you to record your favourite TV programs. Before
you use the function, connect a USB drive to the TV
first.
Note:
The feature is available only in selected products
and, due to specific TV network limitations and country
technical requirements, might not be available in
product or place of installation. Feature might also be
blocked by TV network due to copyright protection (HD
content, recording protection).
1.
Press on the remote control
, select
(Settings)
> Channels & Inputs > Channels
>
PVR
.
2.
Press
OK/Right
to enter and select
Record
. It starts
to record automatically.
3.
Press
blue
button to access
Settings
and use
Up/
Down/Left/Right
to adjust the recording duration.
4.
Press
OK
or to stop recording manually,
the recorded file will be saved. In normal
operation, the recording will stop automatically
when the recording duration expires.
Note:
To access the blue button or , you need to
press button on the remote control to display the
virtual remote control
keyboard first.
5.
In recording, the PVR mini panel will also show on
the screen to indicate the recording progress.
6.
To watch the recorded program, exit PVR mode first.
Press
on the remote control
, select
(Settings)
> Channels & Inputs > Channels
>
PVR > PVR
List
, then select the related record file. Press
OK
Using Teletext
Selecting Decoding Page Language
1.
Press
on the remote control, select
(Settings)
> Channels & Inputs > Channels > Teletext >
Decoding Page Language
and press
OK/Right
to
enter.
2.
Press
Up/Down
to select a proper type of language
in which Teletext will display and press
OK
to
confirm.
3.
Press to return to the previous menu.
Digital Teletext Language
On digital TV channels, depending on the broadcaster,
you may be able to enjoy a service with multiple initial
Teletext pages in different languages. This function
allows you to select an available language as primary
language, which relates to different initial Teletext
pages.
1.
Press
on the remote control, select
(Settings)
>
Channels & Inputs >Channels > Teletext > Digital
Teletext Language
and press
OK/Right
to enter.
2.
Press
Up/Down
to select a language and press
OK
to confirm.
3.
Press to return to the previous menu.
120Hz DLG
(* not available for 43C645 and 50C645)
1.
Press
on the remote control, select
Picture >
Advanced Settings > Motion
and press
OK
to
enter.
2.
Select the
120HZ DLG
option and press
OK
to
toggle between on and off..
3.
Press to return to the previous menu.
Notes:
- 120Hz DLG is only available at resolution up to 2K
(2560 x 1440). 4K resolution will only support 60Hz.
- Variable Refresh Rate and Auto Low Latency mode
need to be set to on.
- A compatible games console or PC is required,
please refer to games console or PC instructions for
further information.
Live TV Pause
(* Available according to the software version)
Allows you to pause, fast forward and rewind live TV,
so you don’t have to miss any part of your favourite
programs. Before you use the function, connect a
USB drive to the TV first. For the first time, you should
complete the disk setup for the USB drive.
Press
on the remote control, select
(Settings)
>
Channels & Inputs > Channels
>
Live TV Pause
,
then press
OK
to turn it on. Then exit to TV mode, press
Chapter 6
Other Functions
