12
Chapter 4
Using more of your TV
Enabling Subtitle Languages on Digital TV Channels
1.
Press
on the remote control, select
Channels >
Subtitle > Digital Subtitle Language 1st
and press
OK/Right
to enter.
2.
Press
Up/Down
to select a subtitle language as your
preferred language and press
OK
3.
Press
Up/Down
to select
Digital Subtitle Language
2nd
and press
OK/Right
to enter.
4.
Press
Up/Down
to select a secondary subtitle
language and press
OK
5.
Press
to return to previous interface.
Selecting a Subtitle Type on Digital TV Channels
1.
Press
on the remote control, select
Channels >
Subtitle > Subtitle Type
and press
OK/Right
to
enter.
2.
Press
Up/Down
to select a subtitle type and press
OK
Hearing Impaired
to display the hearing impaired subtitles with your
selected language.
3.
Press
to return to previous interface.
Using Teletext
Selecting Decoding Page Language
1.
Press
on the remote control, select
Channels >
Teletext > Decoding Page Language
and press
OK/Right
to enter.
2.
Press
Up/Down
to select a proper type of language
in which Teletext will display and press
OK
to
3.
Press
to return to previous interface.
Digital Teletext Language
On digital TV channels, depending on the broadcaster,
you may be able to enjoy a service with multiple initial
Teletext pages in different languages. This function
allows you to select an available language as primary
language, which relates to different initial Teletext
pages.
1.
Press
on the remote control, select
Channels >
Teletext > Digital Teletext Language
and press
OK/Right
to enter.
2.
Press
Up/Down
to select a language and press
OK
3.
Press
to return to previous interface.
Network Wake Up
This function allows you to turn on your TV from standby
mode via a network. To use this function, please make
sure:
1.
Your TV is connected to an effective home network;
2.
The desired controller, such as a smartphone, is
connected to the same network as your TV;
3.
An app which supports network waking up function,
has been installed into the controller;
4.
Networked standby is set to on in the
Network &
Internet
menu under homepage. Press , select
(Settings) > Network & Internet
, use
Down
to
Installing Channels
This section describes how to search and store
channels automatically. This may be done in either of
the cases below:
-
you are prompted that there are no channels in TV
mode;
-
you want to update your channels.
1.
In TV mode, press
on the remote control and
select
Channels
>
Channel scan
. Press
OK/Right
to enter.
2.
The TV installs and arranges channels according
to your country or region. Press
Up/Down
to select
Country/Region
, and press
OK/Right
to enter.
Enter the default password
1234
or your own
password in case you have changed the password
in the
System
>
Parental Controls
menu. Press
Up/Down
to select your country or region and press
OK
to confirm.
3.
Press
Up/Down
to select
Scan
Automatically
and
press
OK/Right
to enter.
4.
Press
Up/Down
to select
Channel Type
and
press
Left
/Right
to select
Digital
,
Analog
or
Digital&Analog
.
5.
After configuration is completed, press
Down
to
select
Search
and press
OK
to start scanning
channels.
6.
The channel search may take a few minutes. After
the automatic search, channels are arranged in a
preset order. If you wish to hide or move channels,
press
on the remote control, select
Channels
>
Channel Organizer
and press
OK/Right
to enter.
Note:
If the channel search retrieved only the analogue
channels it could be caused by poor broadcasting and
therefore is not covered by manufacturer warranty.
Manufacturers cannot be held responsible for lack of or
poor broadcasting in some areas.
Using Subtitles
You can enable subtitles for each TV channel. Subtitles
are broadcast via Teletext or DVB-T digital broadcasts.
With digital broadcasts, you have the additional option
of selecting a preferred subtitle language.
Notes:
-
Subtitle
can also be enabled by pressing
button on
the remote control to display the virtual remote control
keyboard and select
Subtitle
directly.
- Some options are available only when
Subtitle
is set
to on.
Turning On/Off Subtitles
1.
Press
on the remote control, select
Channels >
Subtitle
and press
OK/Right
to enter.
2.
Select the
Subtitle
option, press
OK
to toggle
between on and off.
3.
Press
to return to previous interface
.
Summary of Contents for 32S5400AF
Page 1: ...S5400A SERIES...
