Ludwig-Rinn-Str. 10-14
D - 35452 Heuchelheim
Phone: +49-(0)641-96284-0
Fax: +49-(0)641-96284-28
www.ambiento.de
Seite 13 von 36
3.3 Mounting
Mounting of the wall mounting plate only by authorized technical personal and
electrician. tci GmbH cannot take over adhesion for the installed wall plate and their
function. An examination by technical personnel is necessary. Only in vertical
mounting!
Assembly only in the unstressed condition of the inlets.
Step 1:
Disconnect the cover of the system unit. Use the
wall fastening panel as drill template. Position the
board in the way that the oval cavity is congruent
with the built-in power outlet/ socket. Through
this hole all feed cables are laid. Assign the
4 screw holes in the wall. Choose a suitable
screw type and length depending on the wall
composition.
Introduction about position of the ambiento:
The position of the ambiento depends of the body
height of the user.
We introduce
: Display middle
~ 1650 mm from the finished ground floor
Step 2:
Place holes for the countersunk screws M5.
