20
Please note:
As soon as your walkie-talkie is “called” by another
walkie-talkie, the receiving symbol will appear on
the display.
This symbol will appear when the other person ends their
message. An acoustic signal also sounds. You may now
send your own message.
You cannot send and receive a call alert tone and
a message at the same time. Therefore, wait until
the other person has ended their message before
answering them.
Searching for weak signals (monitor function)
The monitor function enables your walkie-talkie to search
for weak signals on the channel selected. This may be useful
if reception conditions are poor (e.g. atmospheric disturbances
due to thunderstorms, power lines close by, etc.).
M
Press and hold the
MON
button to use the monitor function.
M
Release the
MON
to end the monitor function.
The CTCS
System is not active while the monitor
function is in use.
Scanning all channels (scan function)
When the scan function is activated, the walkie-talkie
continuously scans all 8 channels. As soon as it receives
a message, the search stops and you will hear the message
or radio signals.
