13
Adjusting the height of the coffee spout
You can adjust the height of the coffee spout to match the size of the cup.
For espresso cups, slide
the coffee spout down-
wards.
For large cups, slide the
coffee spout upwards.
For tall glasses, slide the
coffee spout upwards
and remove the drip
bowl.
Switching on the machine
Prerequisites:
• The machine is switched off.
• The power plug is plugged into the socket.
• The water tank is full.
• The coffee bean compartment is full.
To switch on the machine, proceed as follows:
1. Press the on/off switch to switch
on the machine.
The rinsing/hot water button
flashes and the heating up pro-
cess starts.
The pump starts after a few seconds. A small amount of water is flushed through
the system and dispensed into the drip bowl.
As soon as all the buttons remain
permanently lit, the machine will be
ready.
12. Pour out the water in the drip
bowl if necessary.
13. Rinse out the machine twice as
described in the "Rinsing the
machine" chapter. The machine
is then ready for use.
109547 en Kaffeevollautomat_USA_v4.indd 13
109547 en Kaffeevollautomat_USA_v4.indd 13
31.08.22 09:47
31.08.22 09:47
