Weather forecast
sunny
fair to cloudy
overcast
rain
stormy
Trend
rising
steady
falling
Entering the current atmospheric pressure at your loca-
tion and the appropriate symbol for the current weather
is essential when setting up the device if the weather
station is to work properly.
2. Press and hold the
MODE
button for approx. 3 seconds.
Set the atmospheric pressure
value and weather symbol.
Also see the section “Setting
the barometer and weather
symbol (prior to first use)”.
Reading values
Switching between displays
(time/date/max. height
measured)
Press the
MODE
button
briefly to switch between the
displays.
Weather forecast
Based on the atmospheric pres-
sure measured during the past
12 hours, the weather station
determines a trend for further
development in the next 12 to
24 hours.
It then calculates a forecast
for forthcoming weather condi-
tions which is displayed by
means of weather icons.
Barometer
The barometer shows the cur-
rent height value and atmos-
pheric pressure.
In addition, it saves the atmos-
pheric pressure trend for the
previous 12 hours. The trend is
displayed in the bar chart.
1. Press the
MODE
button until
the maximum height meas-
ured (
meter
) is shown in the
display.
2. Briefly press the
–
button to
switch between the displays.
Temperature, air humidity
and measured height
The weather station measures
the current temperature, the
relative air humidity and cur-
rent height.
The device also calculates a
trend
and saves the maxi-
mum and minimum values of
the last 12 hours.
Press the
+
button briefly to
switch between the displays.
Problems / solutions
Incorrect temperature
display
Malfunction due to direct sun-
light, air conditioner, heater or
similar. Move the device away
from the source of the problem.
Pale and incorrect displays
Battery is weak or contacts are
dirty. Clean the battery con-
tacts or replace the battery if
necessary.
Black display
The temperature is too high or
the display has been exposed
to direct sunlight for too long.
Move the device to a cooler
place where it is not exposed
to direct sunlight.
The display shows
unreasonable values
Remove the battery, wait for a
few seconds and restart.
Technical specifications
Model: 317 534
Batteries: 1x CR2032/3 V
Protection
type: IPX3
Barometer range
300 to 1100 hPa
Display accuracy:
+/– 3hPa (within the range
750–1100 hPa, at 25°C)
Temperature range
Function range: (–20°C ~
+50°C / +4°F ~ +122°F)
General range that can be
shown: (–40 ~ +73°C //
LL will be shown below –40°C;
HH will be shown above +73°C)
Hygrometer
Function range: (30% ~ 90%)
rel. air humidity
General range that can be
shown: (0 ~ 99%)
Function temperature
–20 ~ +50°C (temperature
ac/– 1 at 0 ~ +40°C)
Made exclusively for:
Tchibo GmbH, Überseering 18,
22297 Hamburg, Germany
In the course of product
improvement, we reserve the
right to make technical and
optical modifications to the
product.
Please note: Atmos-
pheric pressure-based
weather forecasts are
approximately 70%
accurate. You should
therefore never rely
solely on the weather
station, especially in
situations where the
weather is critical.
Please note: At temper-
atures below 0°C no
values will be displayed
for the humidity.
If you carry the
weather station on
your body, your body
temperature will influ-
ence the measure-
ments. In order to
determine the correct
ambient temperature,
move the weather
station away from
your body for approx.
30 minutes.
