background image

Caution

You are cautioned that any change or modifications not expressly ap-
proved in this manual could void your warranty.

eMc/eMi

This equipment has been tested and found to comply with the limits for 
a Class B Digital device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against 
harmful interference in residential installations. This equipment gener-
ates, uses and can radiate radio frequency energy and – if not installed 
and used in accordance with the instructions – may cause harmful inter-
ference to radio communications. However, there is no guarantee that 
interference will not occur in a particular installation. If this equipment 
does cause harmful interference to radio or television reception – which 
can be determined by turning the equipment off and on –, the user is 
encouraged to try correcting the interference by one or more of the 
following measures:
•   Reorient or relocate the receiving antenna.
•   Increase the separation between the equipment and the receiver.
•   Connect the equipment to an outlet on a circuit different from the 

one to which the receiver is connected.

•   Consult the dealer or an experienced radio/TV technician for help.

For the customers in Canada:

This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-
003 du Canada.

Important Safety Instructions

i

Mportant

 

safety

 

instructions

1.  Read these instructions.
2.  Keep these instructions.
3.  Heed all warnings.
4.  Follow all instructions.
5.  Do not use this apparatus near water.
6.  Clean only with dry cloth.
7.  Do not block any ventilation openings.
8.  Install in accordance with the manufacturer’s instructions.
9.  Do not install near heat sources such as radiators, heat registers, 

stoves, or other apparatus (including amplifiers) that produce heat.

10.  Only use attachments/accessories specified by the manufacturer.
11.  Refer all servicing to qualified service personnel. Servicing is required 

when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects 
have fallen into the apparatus, the apparatus has been exposed to 
rain or moisture, does not operate normally, or has been dropped.

Warning!

•  To reduce the risk of fire or electrical shock, do not expose this 

equipment to dripping or splashing and ensure that no objects filled 
with liquids, such as vases, are placed on the equipment.

•   Do not install in a confined space.

Service

•  All service must be performed by qualified personnel.

Summary of Contents for VoiceLive Touch2


















Reviews: