they are displayed in scale degree terminology. They are
organized lowest to highest, relative to the input note.
MAP IN SOURCE / MAP IN NOTE
These allow to customize individual harmony note
intervals relative to your input note and create a custom
scale. A custom scale is not share-able with other
presets until the preset is copied to another location.
To customize a scale, pick a key and scale closest to
what you want for your song. Sing the note you upon
which you want the harmony interval to change (MAP
IN SOURCE set to SUNG) or select it with the MAP IN
NOTE parameter (MAP IN SOURCE set to MANUAL).
Now you can change the harmony interval with the
MAP IN NOTE parameter described below.
V1 to V4 MAP OUT
Sets the interval relationship between each of the four
harmony voices for the current input note and key and
scale settings. Typically, incrementing or decrementing
any active harmony voices can make a scale work over
your combination of melody and chord change.
NATURALPLAY = SHIFT Mode
V1 to V4 VOICING
The voicings for Shift mode have no musical intelligence
and as such will produce harmony a fixed, unmoving
interval away from your lead voice. You can select any
semitone interval from -24 semitones to +24 semitones.
They are organized lowest to highest, relative to the
input note.
NATURALPLAY = MIDI NOTES, MIDI
NOTES 4 CHAN Modes
DOUBLING
This changes from an ON/OFF parameter to a selection
of the number of voices you can control via MIDI.
o OFF - No harmony voice doubling is possible but
you have access to 8 unique MIDI note intervals
upon which to build harmonies.
o ON (4 VOICES X2) - With this you can play up
to 4 voices at once, but each voice can be doubled
for extra thickness.
The Edit Menu: HARMONY Tab
70
Summary of Contents for Voicelive 2
Page 1: ...USER S MANUAL Ver 1 2 ...
Page 9: ...Page Head 9 Front Panel 1 2 4 5 6 7 8 9 3 11 10 12 13 14 15 16 17 18 ...
Page 36: ......
Page 104: ......