TC-Helicon Perform-V Reference Manual Download Page 5

Page: 5 / 52

Safety information

Perform-V – Reference manual (updated 2015-11-17) 3

Service

►

All service must be performed by qualified
personnel.

►

There are no user-serviceable parts inside.

Warning

►

To reduce the risk of fire or electric shock, do
not expose this apparatus to rain or moisture
and objects filled with liquids, such as vases,
should not be placed on this apparatus.

►

This apparatus must be earthed.

►

Use a three wire grounding type line cord like
the one supplied with the product.

►

Be advised that different operating voltages
require the use of different types of line cord
and attachment plugs.

►

Check the voltage in your area and use the
correct type.

Voltage

Line plug according to standard

110 to 125 V UL817 and CSA C22.2 no 42.
220 to 230 V CEE 7 page VII, SR section 107-

2-D1 / IEC 83 page C4.

►

This equipment should be installed near the
socket outlet and disconnection of the device
should be easily accessible.

►

To completely disconnect from AC mains, dis-
connect the power supply cord from the AC
receptacle.

►

The mains plug of the power supply shall re-
main readily operable.

►

Do not install this device in a confined space.

►

For use at an altitude of 2000 m or lower.

►

Do not open the unit – risk of electric shock
inside.

Summary of Contents for Perform-V





















































Search results

Summary of Contents for Perform-V

Reviews:

Related manuals for Perform-V

Brands by name

Popular brands

TC-Helicon Perform-V, Reference Manual

Search results

Summary of Contents for Perform-V

Reviews:

Related manuals for Perform-V

Brands by name

Popular brands