3
SYSTEM 6000 & DAW INTEGRATION
Example 2
Computer running ProTools or Logic/ProTools.
Requirements:
• Mac or PC with Ethernet connection running TDM-based
Digital Audio Workstation.
• ADAT or TDIF external I/O box (connected to DAW).
• Reverb6000 mainframe
• Mac or PC TC Icon software editor for Reverb6000
• RME ADI-8 DD interface
• MIDI interface for sequencer automation.
Setup and connections:
1.The TC Icon Mac/PC software editor *) must be installed
on the computer, and Ethernet card IP-address
configuration made, following instructions in the
Reverb6000 manual.
2.Crossed Ethernet cable *) connects Reverb6000 with
computer Ethernet card.
3.Four pairs AES/EBU snake from 25pin D-Sub to XLR's *)
connects Reverb6000 and RME ADI-8 DD interface.
4.ADAT optical or TDIF standard cables **) connect RME
ADI-8 DD and external I/O box
5.Word clock cables distributed from clock master to
Reverb6000 and RME ADI-8 DD (recommended) **)
6.MIDI cables connect Reverb6000 MIDI I/O (5-pin DIN
format) and DAW MIDI interface **)
*) Supplied with Reverb6000
**) NOT supplied with Reverb6000
The following illustrates how the RME LEDs should be
lit when correctly setup:
