background image

 Setup

PolyTune 2 English Manual Version 2.1 4

Setup

Ready…

The PolyTune 2 box should contain the follow-
ing items:

–  1 PolyTune 2 pedal
–  2 rubber feet for “non-velcro” pedalboard 

mounting

–  1 TC Electronic sticker
–  1 leaflet about TC’s guitar FX product range.

Inspect all items for signs of transit damage. In 
the unlikely event of transit damage, inform the 
carrier and supplier.

If damage has occurred, keep all packaging as it 
can be used as evidence of excessive handling 
force.

Set…

–  Connect a 9V power supply with the following 

symbol to power in socket of PolyTune 2.

 

!  Please note that PolyTune 2 does not come 

with a power supply.

  ! You can also power PolyTune 2 using a 

standard 9V battery, but if you intend to 
power additional pedals using the power 
out jack, you need to use a power supply.

–  Plug the power supply into a power outlet.
–  Connect your instrument to the “in” jack on 

the right side of the pedal using a ¼“ jack ca-
ble.

–  Connect the “out” jack on the left side of the 

pedal to your amplifier using a ¼“ jack cable.

–  If you have another 9V guitar pedal that you 

want to power, connect it to the power out 
socket on the rear of the pedal.

Get ready for a new 

tuning experience!

Tuning your instrument with PolyTune 2 is fast 
and intuitive. If you don’t feel like reading the 
manual, just strum your instrument and watch 
the display. We think you’ll like what you see.

If you want to learn more – read on!

Summary of Contents for PolyTune 2














Reviews: