background image

 

Important Safety Instructions

PolyTune 2 English Manual Version 2.1 1

Important Safety Instructions

 

The lightning flash with an arrowhead 
symbol within an equilateral triangle is 
intended to alert the user to the pres-
ence of uninsulated “dangerous volt-
age” within the product’s enclosure 
that may be of sufficient magnitude to 
constitute a risk of electric shock to 
persons.

 

The exclamation point within an equi-
lateral triangle is intended to alert the 
user to the presence of important op-
erating and maintenance (servicing) 
instructions in the literature accompa-
nying the product.

  1.  Read these instructions.
  2.  Keep these instructions.
  3.  Heed all warnings.
  4.  Follow all instructions.
  5.  Do not use this apparatus near water.
  6.  Clean only with dry cloth.
  7.  Do not block any ventilation openings. In-

stall in accordance with the manufacturer’s 
instructions.

  8.  Do not install near any heat sources such 

as radiators, heat registers, stoves, or other 
apparatus (including amplifiers) that pro-
duce heat.

  9.  Do not defeat the safety purpose of the po-

larized or grounding-type plug. A polarized 
plug has two blades with one wider than 
the other. A grounding type plug has two 
blades and a third grounding prong. The 
wide blade or the third prong are provided 
for your safety. If the provided plug does 
not fit into your outlet, consult an electrician 
for replacement of the obsolete outlet.

 10.  Protect the power cord from being walked 

on or pinched particularly at plugs, conve-
nience receptacles, and the point where 
they exit from the apparatus.

 11. Only use attachments/accessories speci-

fied by the manufacturer.

 12.  Use only with the cart, stand, tripod, brack-

et, or table specified by the manufacturer, 
or sold with the apparatus. When a cart is 
used, use caution when moving the cart/
apparatus combination to avoid injury from 
tip-over.

 13. Unplug this apparatus during lightning 

storms or when unused for long periods of 
time.

 14.  Refer all servicing to qualified service per-

sonnel. Servicing is required when the ap-
paratus has been damaged in any way, 
such as power-supply cord or plug is dam-
aged, liquid has been spilled or objects 
have fallen into the apparatus, the appara-
tus has been exposed to rain or moisture, 
does not operate normally, or has been 
dropped.

Warning!

–  To reduce the risk of fire or electric shock, do 

not expose this apparatus to rain or moisture 
and objects filled with liquids, such as vases, 
should not be placed on this apparatus.

–  Do not install this device in a confined space.

Caution

You are cautioned that any change or modifi-
cations not expressly approved in this manual 
could void your authority to operate this equip-
ment.

Service

– All service must be performed by qualified 

personnel.

Summary of Contents for PolyTune 2














Reviews: