TC Electronic NOVA System, User Manual

Page: 24 / 46

Recall
Recalling presets are done in slightly different ways
depending on whether you are in Preset or Pedal mode.
In Preset mode
Presets are recalled pressing the switches marked 1, 2,
or 3.
To increase the preset bank number, press and hold the
switch in the upper left corner:
To decrease the preset bank number; press and hold the
switch in the lower left corner:
In Pedal mode
Presets are still recalled using switches marked 1, 2 or 3.
However in this mode you must press and hold the
switches for about 0.5 second.
Preset banks are still selected as described above.
Edit
As soon as one of the seven EFFECTS EDIT switches are
pressed NOVA System is in edit mode.
In Edit mode you have several options:
Selecting effects: Press one of the EFFECTS EDIT buttons
to enter edit mode.
Example: Drive selected
Press several times to select the desired effects algorithm.
Enable/Disable effect: Though you may be editing an
effect, the effect block may not be active. Effects are
enabled/disabled by pressing the corresponding EFFECT
switch.
Exit edit mode without storing changes: If you want exit edit
mode without storing your changes this can be done in two
ways. Either press MENU, or press and hold the EFFECTS
EDIT button of the effect you are currently editing.
A dot in the numeric display (see illustration below),
indicates that the current preset has been edited.
RECALL - EDIT
24