SETUP EXAMPLE: STEREO LOOP SETUP
8
In this setup, we use the pre-amp from one of
the combo amps to generate the basic sound
and the NOVA Modulator to split the signal into
stereo. Please note that by connecting one of
the Modulator’s outputs to the return jack of amp
B, we only use the power amp section of that
second amp.
•
Connect your guitar to the input of amp A.
•
Connect amp A’s effect send to the left input
of the NOVA Modulator.
•
Connect the left output of the NOVA
Modulator to amp A’s effect return.
•
Connect the left output of the NOVA
Modulator to amp B’s effect return.
For best signal to noise ratio, calibrate
the pedal according to the level of the
input signal. For further information, refer
to this manual’s “Calibration” section.
