Tempo Indication in LFO Sync mode
In LFO Sync mode the tempo is set either by turning the
Engine A SPEED knob or by tapping the TAP TEMPO
switch.
If you set the tempo using the Engine A SPEED knob the
LED next to the SPEED knob will indicate the tempo.
If you tap the tempo using the TAP TEMPO switch, the
TAP TEMPO LED will indicate the tempo.
Switching LFO Sync mode on and off
When switching LFO Sync mode off in Manual mode,
the value of the Speed parameter in Engine B will
change to the current position of Engine B’s SPEED
knob. Engine A will retain the tap tempo speed.
When switching LFO Sync mode off in Preset mode,
the Speed parameter values of both Engine A and
Engine B will change to the values originally stored in
the preset.
LFO Sync mode “Off”
When LFO Sync mode is “off” it is possible to select
which effects Engine that is controlled using the TAP
ADDITIONAL FEATURES
26
TEMPO switch. This is great if you e.g. want to control
the speed of a tremolo in Engine A, but not the speed
of the chorus selected in Engine B.
Step by step example:
Object: TAP TEMPO controlling the speed of Engine B
Turn the SPEED knob on Engine A and then tap the
TAP TEMPO switch. You have now set the tempo of
Engine A using the Engine A SPEED knob and the
tempo of Engine B using the TAP TEMPO switch.
•
The Engine A Speed LED is showing the tempo (of
Engine A).
•
The Tap Tempo LED is showing the tempo of
Engine B.
•
The Engine B Speed LED is not lit.
Object: TAP TEMPO controlling the speed of Engine A
•
The Engine B Speed LED now indicates the tempo
of Engine B according to the position of the SPEED
knob.
•
The Engine A tempo (that was previously indicated
by the Engine A Speed LED) is now shown in the
Tap tempo LED.
•
The Engine A SPEED LED is not lit.
