
12
12
Exercise 1:
How to recall a preset
Select Engine 1 or 2 or the Combined 1+2 by pressing the corre-
sponding RECALL key.
Turn the ADJUST wheel to scroll through the presets. While
scrolling you will see both the preset number in the display and
the LED of the OK key is blinking. At this point the preset is not
yet recalled (active). Select ROM preset #5 and press OK to
Confirm. Preset #5 is now recalled.
Exercise 2:
How to take a Snapshot
Press the Engine 1 RECALL key. Select e.g. preset #26
using the ADJUST wheel.
Press OK to confirm.
Press the Engine 2 RECALL key. Select e.g. preset #28
using the ADJUST wheel.
Press OK to confirm.
Press SHIFT followed by SNAPSHOT STORE key #1.
Your Snapshot is now stored.
To see that it works:
Recall two different presets in Engine 1 and 2.
Now press SNAPSHOT key #1, and once again you have
recalled preset #26 into Engine 1 and preset #28 into Engine 2.
Snapshots
The SNAPSHOT keys, located between the Combined
1+2 and the control section, are actually four fast
RECALL keys. Switch between your favorite Single
presets or Combined presets with the touch of a single
key or use the SNAPSHOTS as four compare keys.
A Snapshot will always include both presets and their Routing
just like a Combined preset.
With the Snapshots you are able to switch between completely
different configurations with the touch of a single key.
Store a Snapshot
When you want to store a Snapshot of your M3000 setup, press
SHIFT followed by one of the four SNAPSHOT keys.
Recalling a Snapshot
Recall of a Snapshot is very easy as well: Simply press the
relevant SNAPSHOT key and the M3000 has recalled the entire
setup.
RECALL & SNAPSHOTS
Index feature in the Recall Mode
Press and hold down the RECALL key on either Engine 1 or 2. A preset index display will pop up.
This feature gives you an overview over the Single ROM presets and enables you to quickly access the desired
type of presets.
If the current recalled preset is in the range of 1 - 250,
the overview will cover this range only.
If the current recalled preset is in the range of 251 - 500
the overview will cover this range only.
Summary of Contents for M3000
Page 1: ...M3000 STUDIO REVERB PROCESSOR USERS MANUAL...
Page 2: ......
Page 6: ......
Page 30: ...28 28 VSS INTRODUCTION...