16
Serial
The Serial mode is a Stereo In/Out
Routing. The Serial mode is very useful
when you want two independent effects
in the same signal path; i.e., from a
Keyboard through the M2000 Reverb and Chorus to The mixer.
Parallel
The Parallel mode is a stereo In/Out
Routing. Both Engines will work as stereo
effects and their Output will be mixed
down to a stereo signal. With this Routing,
the M2000 can be used as two parallel effects on the same stereo
source. You may also set the I/O menu to left input to get two inde-
pendent stereo-out effects on the M2000 from a single send on the
mixer.
Dual input (Split mode)
The Dual input mode is a Dual mono In /
stereo Out Routing. Left In is always
attached to ENGINE 1 and Right In is
attached to ENGINE 2. Using this Routing enables you to get two
different effects with separated inputs; i.e., connect Aux 1 from
your Mixer to Left In and Aux 2 to Right In. You now have
access to two separate effects with a common stereo output. Set
the individual Preset output volumes to achieve the correct effects
balance.
Dual Mono
This mode is for Dual Mono In/Out
Routing. Left In/Out is always ENGINE 1
and Right In/Out is ENGINE 2. The Dual
Mono is very useful when you want to
use the M2000 as two independent Inserts.
Stereo
When you select the Stereo Routing, the
two Engines will link together to perform
true Stereo. This means that the preset of
Engine 1 will be copied into Engine 2 and
the Edit pages will lock together. The Stereo Routing is indicated
by the two Edit LEDS which will be lit simultaneously. Left and
Right channel audio path are completely separated in this
Routing.
Preset Glide
When the Preset Glide Routing is se-
lected, the M2000 will perform preset
changes by crossfading the current Effect
and the new preset. This gives you a very
smooth change of effects; i.e., allowing a Delay to keep repeating
while a Chorus is being faded in.
The glide time is located in the Utility menu (see Util/MIDI).
Please note that only one Engine is available while the M2000 is
in the Preset Glide Mode.
ROUTING
Pressing the Routing key gives you the ability to choose one of six different Routings.
Move the marker by pressing the Cursor keys and press OK to accept the new Routing.
A small pop-up window will tell you that the Routing has changed.