TC Electronic Finalizer 96K, User Manual

Page: 46 / 56

46
MIDI CONTINUOUS CONTROLLERS
Left In 10
Right In 11
Ext. Insert In 12
Ext. Insert Out 13
Input (Analog or Digital) 14
Clock 15
Balance 16
Dither Select 17
Analog Out Gain 18
Fade Curve 19
Fade Time 20
Bypass 21
Low Cut Filter 22
Digital Out Format 23
Digital Out Copy 24
Block On Select 25
Insert 2 - type 26
Fade Value 27
Fade Command 28
Insert 1 - type 29
Normalizer Gain 30
Normalizer Clip 31
Low EQ Frequency 32
Low EQ Slope 33
Low EQ Gain 34
Band 1 EQ Frequency 35
Band 1 Bandwidth 36
Band 1 Gain 37
Band 2 EQ Frequency 38
Band 2 Bandwidth 39
Band 2 Gain 40
Band 3 EQ Frequency 41
Band 3 Bandwidth 42
Band 3 Gain 43
High EQ Freq. 44
High EQ Slope 45
High EQ Gain 46
EQ Overall Gain 47
Bands Low Mid High
Comp. Threshold 48 61 74
Compressor Ratio 49 62 75
Compressor Attack 50 63 76
Compressor Release 51 64 77
Compressor Level 52 65 78
Limiter Threshold 53 66 79
Limiter Ratio 54 67 80
Limiter Attack 55 68 81
Limiter Release 56 69 82
Exp. Threshold 57 70 83
Expander Ratio 58 71 84
Expander Attack 59 72 85
Expander Release 60 73 86
Low-Mid Crossover 87
Mid-High Crossover 88
Dynamics Clip 89
Dynamics Crest 90
Dynamics Level 91
Dynamics Ceiling 92
Dynamics Delay 93
Expander Range 94
Radiance Drive 95
Radiance Curve 96
Stereo Adjust MS 97
Stereo Adjust L/R 98
De-esser Threshold 99
De-esser Ratio 100
De-esser Attack 101
De-esser Release 102
De-esser Frequency 103
De-esser Curve 104
Using any standard MIDI device to transmit continuous controllers you are able to control all parameters in the
Finalizer. Please refer to the user’s manual of the sending device on how to set up the controller numbers.