Quick Start Guide
(EN)
Controls
(1)
STORE/LEVEL switches
– Briefly flip the switch
up to store the current loop as a backing track,
or hold up for 3 seconds to delete stored backing
track. Hold the switch in the down position while
turning the associated LOOP knob to adjust the
level of the backing track.
(2)
LOOP knobs
– Adjust the level of a loop or
backing track.
(3)
SERIAL/SYNC switch
– When set to Serial, either
loop 1 or 2 can be played at a time. In Sync mode,
both loops can be played simultaneously.
(4)
DECAY knob
– Controls the amount of volume
reduction that occurs each time an overdub repeats.
(5)
FX knob
– Selects one of the 7 FX options.
(6)
LOOP 1 and 2 footswitches
– Use these
to control several loop-related functions.
(see reverse side)
(7)
STOP footswitch
– Press to stop both loops
immediately. Hold to erase the loops.
(8)
FX footswitch
– Press to engage the selected
loop FX.
(9)
INPUT jacks
– Connect one ¼" TS cable for mono
operation, or 2 cables for stereo.
(10)
OUTPUT jacks
– Send audio via one or two
¼" TS cables.
(11)
Power input
– Connect the 9V power supply.
(9 V DC, >300 mA)
(12)
MODE switches
– Adjust fine details of pedal’s
operation. See the full manual for details.
(13)
USB input
– Connect to a computer to transfer
files back and forth, and for firmware updates.
(14)
MIDI jacks
– Allows connection of an external
MIDI clock, and program and CC changes from a
MIDI controller.
IMPORTANT SAFETY INSTRUCTION
Before operating the device, please see “Important
Safety Instructions” on page 3 of the full manual.
Visit tcelectronic.com to download the full manual
DITTO X4 LOOPER
Simple and Intuitive Dual-Track Guitar Looper Pedal with Powerful Loop Effects
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11) (12)
(13)
(14)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11) (12)
(13)
(14)
V 2.0
A54-00002-90420
Summary of Contents for Ditto X4 Looper
Page 8: ......
