Chapter 2 Installation
System Configuration
2-5
TC8619 Rev 1.1User Manual
2.7.2.1
Rear Panel (T1/E1 RJ-48F Connector & Pin Assignments)
An RJ-48F female connector is provided on the rear panel for the connection of the
T1/E1 wire pairs. When viewing the RJ-48F connector, the left pair (Pin # 1 & 2) of
the RJ-48F connector are for T1/E1 signal going into the TC8619 (receive), while
the right pair (Pin # 4 & 5) of the RJ-48F connector are for the transmit signal
coming out of the unit.
Figure 2-3 TC8619 Rear Panel T1/E1 Connector & Pin Assignment
Note 1: The T1/E1 signal use the same
pin connections on the RJ-48 female connector.
