- 22 -
TC3715 w/Rate Limit
User's Manual
Rev. 2.0 (A0.1)
Serial/Telnet Configuration Continue
Telnet Interface Connection:
1.
Connect the computer and the TC3715 to the same Ethernet Switch.
2.
Power up the unit.
3.
Start your telnet application and connect to the TC3715 IP address. E.g. 192.168.254.123
4.
Set Port to "telnet" or "23", and set TermType to "vt100."
5.
Once connected, you should see the following screen. (Please refer to the "Trouble shooting"
section, if not connected)
Figure 17. Telnet Connection Dialog
Figure 18. Console Login
Username and Password for Console login is the same as the Web login
Default Username:
user
Default Password:
password
(Note. Unit will logout automatically if more than two minutes of inactivity.)
