Setup
Getting set up and ready to fly is a quick and simple task, as mostly everything comes pre-built from the TBS
factory. When using TBS equipment, it is plug & play to get ready. Follow these easy steps and you will be
shredding the sky in just a few minutes!
Charging battery
The supplied 1S 600mAh battery is charged for storage and transportation (50%). It needs to be charged at
1C, 600mA, before being used. You can still setup and configure the XRACER but it is not recommended to fly
without charging the battery fully first.
The kit comes with a white spade type male plug to JST male plug adapter to make it easier to connect to a
LiPo charger (charger not supplied). You can use any regular R/C LiPo charger or a simple USB stick charger.
The size of the battery is x x x mm.
Mounting battery
Getting the battery mounting is easily done by connecting the two spade connectors (always check the cable
polarity, red-to-red) and slipping the battery into the black battery strap on the underside of the XRACER.
7
