example, p.42,
T10J manual
To bind the XRACER to a
FrSky
radio:
1. Push and hold bind button while plugging in the battery. XRacer is now in bind mode. Orange LED is
on, Red LED is flashing rapidly.
2. If you are using XJT module, dipswitch 1 is up and dipswitch 2 is down (D8). In FrSky Taranis, select
“D8” protocol. Then press “BIND” on Taranis, or turn on XJT module with BIND button pressed
3. Red LED is flashing slowly to indicate successful bind. Orange LED is on. Cycle power on both your
radio and the XRacer to complete the binding procedure.
11
