FAQ
●
After binding, the receiver shows a double pattern and I get no signals in BF/ iNav/
…
○
This is an authentication error on the TRACER. To solve it:
■
Shut down your drone and the TANGO
■
Power up the TANGO
■
Set it in Bind-mode
■
Power up the receiver
■
Push the bind button on the receiver
○
After a few seconds, the green led on the receiver should switch to a constant green light
●
I get movements BF/ iNav/
…
on the 4 sticks but not from any switch
○
You need to assign the switches in the “Mixer” page of your model to a channel you’d like it
to be. For detailed information on the mixer page, have a look at
●
In Agent X/ Lite/ M the TRACER and WiFi module does not show up
○
Navigate in the Model settings, page 1 and disable the external module/ enable the
internal module
●
How to enter bootloader mode
○
Make sure the device is turned OFF and unplug the USB connector.
○
Hold the button down (
Button PAGE for FreedomTX
/
Button MENU for TRACER
) and
plug in the USB - Hold the button until AgenTX detects the MAMBO devices
Manual written and designed by kamikatze-fpv and ivc.no in cooperation with TBS.
50
Summary of Contents for TBS TRACER
Page 41: ...41...
