Changing gimbal springs
The radio comes with a set of softer springs that provide less tension sticks. The difference from the stock
springs is that these are approx. 20-30% less stiff, giving a smooth soft response.
Left: stock, right: soft
Remove the gimbals from the radio and unscrew the spring tension holder, as shown in the following
photo. Unhook the stock springs and re-attach the new ones. This can be a bit tedious and only
recommended for experienced users. A special trick is to first attach the springs to the lever, keeping
tension on it with a tweezer, and then installing back the plastic holster and looping in the spring. This can
be performed without removing the gimbals from the radio, but it is recommended to disassemble the
radio for this step.
39
Summary of Contents for TBS TRACER
Page 41: ...41...
