Universal Remote Control manual V0.9.1
- 7 -
Now you can select the property that you wish to change, by turning and pressing the
rotary controller accordingly. A screen will appear that allows you to change the property
value by turning rotary controller again. The image below shows the display contrast
property as an example :
The desired value can be stored by pressing the rotary controller for three seconds. This
way of saving a property value change, would result in jumping back to the normal
operating display mode again. When you wish to change more than one property, press
the rotary controller once and you will jump back to the URC properties list again were you
can select the next property to change. When all desired URC properties are changed,
select and press “Return” in the URC property list screen which will save all changed
values and jump back to the normal operating display mode. If no buttons are touched for
90 seconds when operating in a setup screen, the URC will automatically jump back to the
normal operating display again without saving any changed property values.
4. WARRANTY / LIMITS OF RESPONSIBILITY
TBS Electronics (TBS) warrants this product to be free from defects in workmanship or
materials for 24 months from the date of purchase. During this period TBS will repair the
defective product free of charge. TBS is not responsible for any costs of the transport of
this product.
This warranty is void if the product has suffered any physical damage or alteration, either
internally or externally, and does not cover damage arising from improper use
1)
, or from
use in an unsuitable environment.
This warranty will not apply where the product has been misused, neglected, improperly
installed or repaired by anyone other than TBS. TBS is not responsible for any loss,
damage or costs arising from improper use, use in an unsuitable environment, improper
installing of the product and product malfunctioning.
Since TBS cannot control the use and installation (according to local regulations) of their
products, the customer is always responsible for the actual use of these products. TBS
products are not designed for use as cricital components in life support devices or
systems, that can potentially harm humans and/or the environment. The customer is
always responsible when implementing TBS products in these kind of applications. TBS
does not accept any responsibility for any violation of patents or other rights of third
