Hardware
Configure all the installed input sticks, switches and
buttons
●
Sticks
- Perform the calibration of the
hall-effect magnetic gimbals
●
Pots
- Not applicable to TANGO II
●
Switches
- Sets the type of switches
●
Battery calibration
- Use a multimeter to
measure and input the voltage
●
RTC battery
- Not applicable to TANGO II
●
Max. bauds
- Specify communication baud
rate when in trainer or joystick mode
●
ADC filter
- Apply filter to the analog inputs
●
RAS
- Relative Antenna Status, not applicable
to TANGO II
●
Debug
- FIXME
Version
Current build and version of the OpenTX firmware
●
As the TANGO II is branch of the OpenTX
codebase it needs it specific build
14
