TBS CROSSFIRE Micro TX Manual Download Page 35

Page: 35 / 60

PWM Ch1 bis 12, RSSI, LQ, RSSI/LQ, Serial RTS

PWM Ch. 6

PWM Ch1 bis 12, RSSI, LQ, RSSI/LQ, Serial RX, MAVLink
RX, CRSF RX

PWM Ch. 7

PWM Ch1 to 12, RSSI, LQ, RSSI/LQ, SBUS, n.i.SBUS, Serial
TX, MAVLink TX, CRSF TX, DSMX, SmartAudio

PWM Ch. 8

Receiver pin

Output type Micro V2/ Nano rx

Default value

PWM Ch1 bis 12, PPM, RSSI, LQ, RSSI/LQ, SBUS, n.i.
SBUS, CRSF TX, MAVLink TX, SmartAudio, DSMX

CRSF TX

PWM Ch1 bis 12, PPM, RSSI, LQ, RSSI/LQ, CRSF RX,
MAVLink RX

CRSF RX

PWM Ch1 bis 12, PPM, RSSI, LQ, RSSI/LQ, CRSF RX,
MAVLink RX

PWM Ch. 3

PWM Ch1 bis 12, PPM, RSSI, LQ, RSSI/LQ, SBUS, n.i.
SBUS, CRSF TX, MAVLink TX, SmartAudio, DSMX

Smart Audio

5 (BST)

PWM Ch1 bis 12, RSSI, LQ, RSSI/LQ, BST SDA

BST SDA

6 (BST)

PWM Ch1 bis 12, RSSI, LQ, RSSI/LQ, BST SCL

BST SCL

Receiver SBUS output

The CROSSFIRE 8ch diversity receiver as well as the CROSSFIRE Micro and Nano RX support SBUS and

n.i.SBUS (non-inverted) respectively. The diversity receiver exposes this functionality on output port 8,

selectable via the output port mapping menu. The Micro RX V1 only has one output port, and it is either

PWM, PPM, SBUS, n.i.SBUS or CRSF capable. The micro receiver v2 got 4 (6)outputs where you can choose

more than one output.

Receiver RSSI or/and LQ output

To get digital (PWM) RSSI, LQ (Link Quality) or RSSI/LQ output for use on OSD and similar equipment, pick a

free channel and set the output to signal type you need. You can also output one of those signals by

injecting it into the PPM stream for processing on an OSD or FC. Use the “Channel Map” menu for this.

Beside of RSSI the receiver can also output link quality (LQ) or a combined value (RSSI/LQ). The RSSI/LQ

value will always show the worse value of both. This is mostly useful if the used OSD only has one input for

link statistics. You can set up your warning levels in your osd as following:

Summary of Contents for Micro TX





























































Search results

Summary of Contents for Micro TX

Reviews:

Related manuals for Micro TX

Brands by name

Popular brands

TBS CROSSFIRE Micro TX, Manual

Search results

Summary of Contents for Micro TX

Reviews:

Related manuals for Micro TX

Brands by name

Popular brands