13
OSD Menu Instructions
☞
Note :
- If the IRIS menu is set to ELC, the SHUTTER menu will be deactivated as you adjust
the brightness using the electronic shutter.
- If the SENS-UP menu is set to AUTO, only OFF and AUTO are available in the
SHUTTER menu.
- If the SENS-UP menu is set to FIX, the SHUTTER menu will be deactivated.
- If the FLICKERLESS function is set to ON, the SHUTTER menu will be deactivated.
SENS-UP : OFF / AUTO x2 ~x256 / FIX x2 ~x256
Automatically detects the ambient light of darkness in the dark or low contrast scene to
extend the accumulated time, keeping the brightness and sharpness image. It can be
also used as FIX mode.
☞
Note :
- If the SHUTTER menu is set to fixed electronic shutter mode, the SENS-UP menu
will be deactivated.
- If the FLICKERLESS menu is set to ON, the FIX mode of the SENS-UP will be
disabled.
- If the IRIS menu is set to ELC, the electronic shutter will control the brightness so the
SENS-UP function cannot be set to FIX mode, but to OFF or AUTO mode.
- If the SHUTTER menu is set to AUTO, the SENS-UP menu can be set to either OFF
or AUTO mode.
FLICKERLESS : OFF / ON
If set to ON, the shitter speed will be fixed to 1/100(PAL : 1/120) second.
This will prevent possible screen distortion due to a mismatch between the vertical
sync frequency and the blinking frequency of the lighting.
☞
Note :
- If the IRIS menu is set to ELC mode, the FLICKERLESS menu will be deactivated.
14
OSD Menu Instructions
- If the SHUTTER menu is set to AUTO or FIX mode, the FLICKERLESS menu will be
deactivated.
- If the SENS-UP menu is set to FIX mode, the FLICKERLESS menu will be
deactivated.
- If the AGC menu is set to FIX mode, the FLICKERLESS function will be disabled.
DIS : OFF / ON
Digital Image Stabilization will set the anti-shake compensation.
☞
Note :
- If you set DIS to ON, the compensation area will be enlarged as set in the digital
zoom factor.
- If you set the digital zoom factor to bigger than the enlarged zoom factor for the
compensation, the DIS function will be deactivated.
DAY / NIGHT : DAY / NIGHT / AUTO / EXT
▪
DAY : if set to DAY, it will be fixed DAY mode regardless of the ambient conditions.
▪
NIGHT : If set to NIGHT, it will be fixed to Black-and-White mode regardless of the
ambient conditions. You can set the BURST option to OFF/ON, or select to output the
Burst signal in NIGHT menu.
- BURST ON
→
Burst signal will output together with the B/W composite video signal.
- BURST OFF
→
Burst signal does not output.
▪
AUTO : The camera will be automatically switched between DAY and NIGHT mode,
according to the lighting condition. If you press the SETUP key on AUTO, you will see
the BURST, DAY
→
NIGHT, NIGHT
→
DAY, MASK AREA options on your screen.
You can set the BURST option to OFF/ON, or select to output the Burst signal in
NIGHT mode.
