background image

 

 

True Day&Night A-DNR 

High-Resolution Color 

Standard Camera 

 

OPERATING INSTRUCTIONS 

TBK-BOX2700 

TBK-BOX2800 

 
 
 
 

             

 

 

 

 

 

 

 

 

Before installing and using the camera, please read the 

instructions thoroughly and retain them for reference. 

 

2

Caution 

 
 
 

 

 

 

 

 

 

 

 

 

 
Warning 

 

 

 

 

 

 

 

 

 

 

This symbol is intended to alert the user to the presence of non insulated 
“dangerous voltage” within the product’s enclosure that may be of sufficient 
magnitude to constitute a risk of electric shock to persons.

 

The exclamation point within an equilateral triangle is intended to alert the user 
to the presence of important operating and maintenance (servicing) instructions 
in the literature accompanying the product.

 

To prevent fire or shock hazard, do not expose the unit to rain or moisture. 
To avoid electrical shock, do not open the cabinet.   
Refer servicing to qualified personnel only. 
Wiring methods shall be in accordance with the National Electric Code. 

This product is manufactured to comply with the CE and FCC Certificate 

standard.

 

Summary of Contents for TBK-BOX2700













Reviews: