11
7. OPERATING PROCEDURE
(1)
Mount the camera on the mounting bracket by using the hole on the top or bottom of the
camera or by using the enclosed 8mm mounting block, furnished by 2 screws.
(2)
Connect the Video Output to the monitor or other video device via a 75 Ohms type
coaxial cable.
(3)
Connect the power source, using the DC Jack (+12V DC in the jack center).
(4)
Wait a while for the camera to power on and the zoom lens will resume to the previous
power on position automatically.
(5)
Once the picture appears on the monitor, press the Zoom Tele, Zoom Wide, Focus Near,
Focus Far and Setup Menu Key to obtain the best picture quality.
7.1 Native Keyboard Operation
Normal Display Mode
Native Keyboard
Camera Function
BRI Brightness
+
BRIGHTNESS- Brightness
-
NEAR Focus
Near
FAR Focus
Far
Zoom TELE
Zoom Tele
Zoom WIDE
Zoom Wide
Move Joystick Left
None
Move Joystick Right
None
Move Joystick Up
None
Move Joystick Down
None
Camera Function
Native Keyboard
Accessing Main Menu
Press the MENU key
Call up the Preset Points
Enter preset number (1~128) and press GO
PRESET to put camera in preset position.
Setting the Preset Points
To program, position camera, enter desired
preset number (1~128), and press SET
PRESET.
AUTO FOCUS Control
Press the AUTO FOCUS Key, the LED of the
AUTO FOCUS lights up and press AUTO
FOCUS key again, to disable the function.
