TBK vision RYK-2K49LVF3, Instruction Manual, Page: 7 / 8

6
(8)
For lens adjustment, move the camera body (some model types
limits the PCB board to180
°
rotational adjustment) and set the focus
by turning the lens to the left or right direction. When the camera
focus adjustment has been completed, rotate the dome housing
clockwise to secure it to the mounting base (shown on figure 5).
(9)
Connect the Video Output to the monitor or other video device through
a 75 Ohms type coaxial cable. Connect the AC/ DC-Terminator with
power source (shown on figure 6).
Note! The inner parts may differ depending on the camera model type.
Figure 6
Figure 5