
5
Figure 4
(6)
DIP Switch Setting (shown on figure 4).
z
Flickerless Function
Set switch-OFF/ F.L. to Flicker to enable flickerless function, in
this mode, the switch-AES/ OFF is auto disabled.
z
AGC-Hi/
AGC-Lo
Function
Adjust the switch to AGC indicates AGC-Hi and OFF indicates
AGC-Low. This switch setting to High or Low of the AGC
maximum gain. AGC-Hi mode--The maximum AGC gain is
approximately 26dB. AGC-Lo mode--The maximum AGC gain
is approximately 16dB.
(7)
BLC FUNCTION
Set Switch-OFF/ BLC to BLC to enable Back Light Compensation
(BLC) function.